Color foam pipe insulation for heating pipe
Our embossed PE insulation sleeve tube has three-layer structure: Outer layer embossing process is smooth, beautiful, anti-aging, anti-ultraviolet; Inner layer is independent foam with bubble structure, unique formula, good insulation resistance, resistance to high temperature of 95 degree without deformation; The insulation sleeve tube is twin-tube combination and easy separation, easy installation, beautiful appearance.
PE foam hot and cold water insulation pipe can be used for solar water heater.
This sleeve tube is made of polyethylene(PE) closed-cell foam, the tube has no interface cracks with small water absorption and good insulation properties, and does not corrode steel tube and copper tube. The surface of sleeve tube can be fixed with a layer of embossed Pe sheet. This sleeve tubes can be widely used for air conditioning insulation pipe and protective sleeve of metal pipes.
| Technical Parameter |
| Thermal conductivity |
0.027-0.030W/m.K |
| compression strength |
160KPa |
| Operating Temperature |
-50-+100ºC |
| Fireproof Performance |
B2 |
| Elastic Restoring Rate |
90% |
| Tubing |
as table for dimensions |
| Resistance To Tensile Stress |
180KPa |
| Flame Resistance oxygen index |
18-25.5 |
| Density |
20-35Kg/m3 |
The Inner diameter 6-40mm, Wall thickness 8 ~ 20mm, can be made according to customers' requirement.
Contact us:
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}